英國採購案 - United Kingdom-Sheffield: Industrial machinery
- 標題：United Kingdom-Sheffield: Industrial machinery
- 採購機關名稱：The University of Sheffield
- 國別：英國
- 類別：機械
- 採購產品說明：3D Weaving Machine
- 標案號碼：2017/S 214-444326
- 資金來源：The University of Sheffield
- 合約型式：Supply Contract
- 截標日期：11/12/2017 12:00
- 開標日期：11/12/2017 12:00
- 標案金額：Value excluding VAT: 1 000 000.00 GBP
- 連結網站：http://ted.europa.eu/udl?uri=TED:NOTICE:444326-2017:TEXT:EN:HTML&src=0
- 聯絡人資料：
The University of Sheffield
Procurement Office, Arts Tower, Western Bank
Sheffield
S10 2TN
United Kingdom
Contact person: Ericka Lyne
Telephone: +44 1142229570
E-mail: e.m.lyne@sheffield.ac.uk
https://www.sheffield.ac.uk
https://www.in-tendhost.co.uk/sheffield/
- 請附上採購詳細內容：
United Kingdom-Sheffield: Industrial machinery
2017/S 214-444326
Contract notice
Supplies
Directive 2014/24/EU
Section I: Contracting authority
I.1)Name and addresses
The University of Sheffield
Procurement Office, Arts Tower, Western Bank
Sheffield
S10 2TN
United Kingdom
Contact person: Ericka Lyne
Telephone: +44 1142229570
E-mail: e.m.lyne@sheffield.ac.uk
NUTS code: UKE32
Internet address(es):
Main address: https://www.sheffield.ac.uk
Address of the buyer profile: https://www.in-tendhost.co.uk/sheffield/
I.2)Joint procurement
I.3)Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at: https://in-tendhost.co.uk/sheffield
Additional information can be obtained from the abovementioned address
Tenders or requests to participate must be submitted electronically via: https://in-tendhost.co.uk/sheffield
Tenders or requests to participate must be submitted to the abovementioned address
I.4)Type of the contracting authority
Body governed by public law
I.5)Main activity
Education
Section II: Object
II.1)Scope of the procurement
II.1.1)Title:
3D Weaving Machine.
Reference number: 1823/343/EML/COM/17
II.1.2)Main CPV code
42000000
II.1.3)Type of contract
Supplies
II.1.4)Short description:
3D Weaving Machine.
II.1.5)Estimated total value
Value excluding VAT: 1 000 000.00 GBP
II.1.6)Information about lots
This contract is divided into lots: no
II.2)Description
II.2.1)Title:
II.2.2)Additional CPV code(s)
42600000
42000000
II.2.3)Place of performance
NUTS code: UKE31
Main site or place of performance:
Equipment to be delivered to the Advanced Manufacturing Research Centre, Composites Group, Catcliffe, Rotherham.
II.2.4)Description of the procurement:
Supply, installation and commissioning (including all necessary training) of a 3D weaving machine for the production of 3D woven carbon fibre preforms. The equipment will be utilised for research projects rather than production, therefore the machine needs to be adaptable for further modifications if required. The solution should also be able to deal with periods of varying usage.
II.2.5)Award criteria
Criteria below
Quality criterion - Name: Solution: Power Loom Capability / Weighting: 15
Quality criterion - Name: Solution: Shedding Mechanism / Weighting: 15
Quality criterion - Name: Solution: Fabric Take Off / Weighting: 15
Quality criterion - Name: Options / Weighting: 10
Quality criterion - Name: Delivery / Weighting: 10
Quality criterion - Name: Warranty / Weighting: 5
Quality criterion - Name: Training / Weighting: 10
Price - Weighting: 20
II.2.6)Estimated value
Value excluding VAT: 1 000 000.00 GBP
II.2.7)Duration of the contract, framework agreement or dynamic purchasing system
Start: 31/12/2017
End: 31/08/2018
This contract is subject to renewal: no
II.2.10)Information about variants
Variants will be accepted: no
II.2.11)Information about options
Options: no
II.2.12)Information about electronic catalogues
II.2.13)Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14)Additional information
Section III: Legal, economic, financial and technical information
III.1)Conditions for participation
III.1.1)Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
III.1.2)Economic and financial standing
Selection criteria as stated in the procurement documents
III.1.3)Technical and professional ability
Selection criteria as stated in the procurement documents
III.1.5)Information about reserved contracts
III.2)Conditions related to the contract
III.2.2)Contract performance conditions:
Supply, installation and commissioning as per HVE Terms and Conditions enclosed with the Invitation to Tender documentation.
Any staged payments required in advance of delivery shall be supported through the provision bank guarantees.
III.2.3)Information about staff responsible for the performance of the contract
Section IV: Procedure
IV.1)Description
IV.1.1)Type of procedure
Open procedure
IV.1.3)Information about a framework agreement or a dynamic purchasing system
IV.1.4)Information about reduction of the number of solutions or tenders during negotiation or dialogue
IV.1.6)Information about electronic auction
IV.1.8)Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: yes
IV.2)Administrative information
IV.2.1)Previous publication concerning this procedure
IV.2.2)Time limit for receipt of tenders or requests to participate
Date: 11/12/2017
Local time: 12:00
IV.2.3)Estimated date of dispatch of invitations to tender or to participate to selected candidates
IV.2.4)Languages in which tenders or requests to participate may be submitted:
English
IV.2.6)Minimum time frame during which the tenderer must maintain the tender
Duration in months: 3 (from the date stated for receipt of tender)
IV.2.7)Conditions for opening of tenders
Date: 11/12/2017
Local time: 12:00
Place:
University of Sheffield.
Information about authorised persons and opening procedure:
Authorised officers of the University.
Section VI: Complementary information
VI.1)Information about recurrence
This is a recurrent procurement: no
VI.2)Information about electronic workflows
Electronic invoicing will be accepted
VI.3)Additional information:
VI.4)Procedures for review
VI.4.1)Review body
High Court (England, Wales and Northern Ireland)
7 Rolls Building, Fetter Lane
London
EC4A 1NL
United Kingdom
VI.4.2)Body responsible for mediation procedures
VI.4.3)Review procedure
Precise information on deadline(s) for review procedures:
The contracting authority will incorporate a minimum ten-day standstill period at the point information on the award of Contract is communicated to tenderers. This period allows unsuccessful tenderers to seek a further debriefing before the Contract is entered into. If an appeal regarding the award of Contract cannot be resolved, the Public Contract Regulations 2015 provides for aggrieved parties to take action in the High Court (England, Wales and Northern Ireland). Any such action should be brought promptly (generally within 30 days).
VI.4.4)Service from which information about the review procedure may be obtained
VI.5)Date of dispatch of this notice:
06/11/2017
